Affiliate disclosure: this page contains affiliate links, including Amazon links marked “Check Price” / “View on Amazon” / “Search on Amazon”. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you. How this works.
Nav class=”breadcrumb”>Home › Wiper Blades › Hyundai i30
Hyundai i30 Wiper Blade Size & Fitting Guide (2012-2023)
Wiper Blade Sizes
Front blade lengths and arm fitting for the Hyundai i30, taken from the Bosch and Valeo entries in the TecDoc-derived parts catalogue. Catalogues publish a front set as two lengths and do not state which blade belongs on the driver’s arm of a right-hand-drive car, so this table labels the blades by length rather than by side. Measure the blade you are replacing, or check both arms, before you order.
| Position | Blade length | Arm fitting |
|---|---|---|
| Front pair | 650 mm / 26 in + 400 mm / 16 in on all three body styles | Hook (9×3 / 9×4) |
| Rear | No data available | — |
Recommended Wiper Blades for Hyundai i30
As an Amazon Associate we earn from qualifying purchases. Always confirm the exact fitment for your model & year before buying.
Confidence in this data: High front; Low rear
Checked against: Autodoc i30 PDE, i30 estate PDE, i30 fastback PDE
Model and body-style splits: Hatch, Estate/Tourer and Fastback all return identical front fitment. No front split.
What Fitting Type?
Catalogue fitting for the Hyundai i30: Hook 9×3/9×4 J-hook
Adapter note. The Bosch set listed for this car is an Aerotwin Retrofit (AR-prefix), which uses the universal 9×3 / 9×4 hook adapter and fits any standard hook arm.
Fit blades in pairs. Both front blades age at the same rate, so replacing only the streaking one usually means doing the other within weeks.
Recommended Wiper Blades
Bosch AR653S
AR653S (3397118911) 650/400 — AR-series Retrofit, universal hook fit (legitimate here). Singles AR26U (650), AR16U (400).
Valeo VH154
No PD-specific set listed; singles FM65 575009 (650), FM40 575002 (400), HU40 578571 (400), VH154 574629 / VH144 574619
Check by registration
The rear blade for this vehicle is not established in the data we checked. No data available. Use a seller’s registration lookup rather than buying on length alone.
How to Replace Wiper Blades
Changing the front blades on the Hyundai i30 takes a few minutes and needs no tools.
- Lift the arm away from the glass until it locks upright, and lay a folded cloth on the screen in case it drops.
- Release the old blade. Slide the blade down towards the base of the arm, then unhook the J-hook from the blade’s bridge and lift the blade clear.
- Compare old and new side by side before fitting — same length, same connector. If the adapter does not match, stop; forcing it damages the arm.
- Fit the new blade until the catch clicks home, then tug it gently to confirm it is locked.
- Lower the arm back to the glass by hand. Repeat on the other side, then test with plenty of washer fluid on a wet screen.
Never let a bare arm snap back onto the glass — a windscreen chipped that way is not covered by the blade warranty.
When to Replace Your Wipers
Wiper rubber hardens with UV and heat rather than with mileage, so a set on a car that is parked outside will usually be finished in about 12 months whatever the distance covered. Replace them when you see any of the following:
- Streaks or a haze left behind on the return sweep
- Juddering or chattering across the glass
- Missed strips of screen, especially at the top of the sweep
- Splits, curling or a shiny, glazed edge on the rubber
- Squealing that does not clear with a wash and a wipe of the rubber
Clean the rubber with a damp cloth every few weeks and clear leaves and grit from the base of the screen; both add months to a set. A blade that still streaks after cleaning is worn, not dirty.
Frequently Asked Questions
What size wiper blades does a Hyundai i30 need?
Sources disagree for the Hyundai i30. 650 mm / 26 in + 400 mm / 16 in on all three body styles Because the figures conflict, measure the blades on your own car before ordering.
What fitting type do Hyundai i30 wipers use?
The Hyundai i30 is catalogued as: Hook 9×3/9×4 J-hook
What rear wiper blade does a Hyundai i30 take?
No data available for the rear blade on the Hyundai i30. Where suppliers disagree or list nothing, we say so rather than guess — check by registration.
How often should I replace Hyundai i30 wiper blades?
About once a year for most UK cars. Wiper rubber degrades with UV, heat and grit rather than with mileage, so a car parked outside will need blades sooner than the distance covered suggests. Replace them as soon as they streak, judder or miss part of the sweep after cleaning.
How we check fitment for this guide
We cross-reference fitment figures against manufacturer specifications and OE-supplier catalogue data where available, and matched to the standard codes that actually govern fit — battery type/group sizes, wiper lengths and fitting types, bulb fitment codes, tyre size markings, and oil specifications. We work by make, model, year, engine, and build date, because a single model can take different parts across its life. Where the right part depends on your exact vehicle, we tell you to confirm by registration or VIN. More on our method →