Affiliate disclosure: this page contains affiliate links, including Amazon links marked “Check Price” / “View on Amazon” / “Search on Amazon”. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you. How this works.
Nav class=”breadcrumb”>Home › Wiper Blades › Hyundai i20
Hyundai i20 Wiper Blade Size & Fitting Guide (2008-2025)
Wiper Blade Sizes
Front blade lengths and arm fitting for the Hyundai i20, taken from the Bosch and Valeo entries in the TecDoc-derived parts catalogue. Catalogues publish a front set as two lengths and do not state which blade belongs on the driver’s arm of a right-hand-drive car, so this table labels the blades by length rather than by side. Measure the blade you are replacing, or check both arms, before you order.
| Position | Blade length | Arm fitting |
|---|---|---|
| Front — longer blade | 600 mm (24 in) | Pinch tab |
| Front — shorter blade | 400 mm (16 in) | Pinch tab |
| Rear | 300 mm / 12 in (Denso DRD-004, single rear listed) — low certainty | Vehicle-specific rear fit |
Recommended Wiper Blades for Hyundai i20
As an Amazon Associate we earn from qualifying purchases. Always confirm the exact fitment for your model & year before buying.
Confidence in this data: Lengths High; side assignment and right-hand drive part not established
Checked against: Autodoc i20 III BC3
What Fitting Type?
Catalogue fitting for the Hyundai i20: Pinch tab (front)
Adapter warning. The Bosch set listed for this car is an Aerotwin Original (A-prefix). Aerotwin Originals ship with a single moulded, vehicle-specific adapter — they are not multi-fit and will not clip onto a different arm type. Bosch’s multi-fit products are the Aerotwin Retrofit (AR-prefix) and Aerotwin Plus (AP-prefix) ranges.
Right-hand drive. The sets catalogued for this vehicle are flagged for left-hand-drive cars and no right-hand-drive equivalent was found in the data we checked. That is a gap in the catalogue rather than proof the part is wrong for a UK car — confirm with the supplier or a dealer parts desk before buying.
Fit blades in pairs. Both front blades age at the same rate, so replacing only the streaking one usually means doing the other within weeks.
Recommended Wiper Blades
Bosch A991S
A991S (3397014 01P) 600/400 — A-series Original, pinch-tab, TecDoc-flagged left-hand drive; right-hand-drive-specific Bosch set no data available
Valeo 574396
574396 (600/380 set), 566017 (600/400 set); singles 575008 (600) + 575002 (400)
Rear blade
300 mm / 12 in (Denso DRD-004, single rear listed) — low certainty Rear blades are usually a moulded, vehicle-specific fit rather than a universal hook — match the part number, not just the length.
How to Replace Wiper Blades
Changing the front blades on the Hyundai i20 takes a few minutes and needs no tools.
- Lift the arm away from the glass until it locks upright, and lay a folded cloth on the screen in case it drops.
- Release the old blade. Squeeze the two pinch tabs on the sides of the connector together and slide the blade off the arm.
- Compare old and new side by side before fitting — same length, same connector. If the adapter does not match, stop; forcing it damages the arm.
- Fit the new blade until the catch clicks home, then tug it gently to confirm it is locked.
- Lower the arm back to the glass by hand. Repeat on the other side, then test with plenty of washer fluid on a wet screen.
Never let a bare arm snap back onto the glass — a windscreen chipped that way is not covered by the blade warranty.
When to Replace Your Wipers
Wiper rubber hardens with UV and heat rather than with mileage, so a set on a car that is parked outside will usually be finished in about 12 months whatever the distance covered. Replace them when you see any of the following:
- Streaks or a haze left behind on the return sweep
- Juddering or chattering across the glass
- Missed strips of screen, especially at the top of the sweep
- Splits, curling or a shiny, glazed edge on the rubber
- Squealing that does not clear with a wash and a wipe of the rubber
Clean the rubber with a damp cloth every few weeks and clear leaves and grit from the base of the screen; both add months to a set. A blade that still streaks after cleaning is worn, not dirty.
Frequently Asked Questions
What size wiper blades does a Hyundai i20 need?
The catalogue front set for the Hyundai i20 is 600 mm (24 in) and 400 mm (16 in). The catalogue does not say which of the two goes on the driver’s arm of a right-hand-drive car, so measure the blade you are replacing rather than assuming the longer one is the driver’s.
What fitting type do Hyundai i20 wipers use?
The Hyundai i20 is catalogued as: Pinch tab (front) Note that Bosch Aerotwin Original (A-prefix) sets carry one moulded, vehicle-specific adapter and are not multi-fit.
What rear wiper blade does a Hyundai i20 take?
Rear blade for the Hyundai i20: 300 mm / 12 in (Denso DRD-004, single rear listed) — low certainty Rear blades are normally a moulded vehicle-specific fit, so match the part number rather than the length alone.
How often should I replace Hyundai i20 wiper blades?
About once a year for most UK cars. Wiper rubber degrades with UV, heat and grit rather than with mileage, so a car parked outside will need blades sooner than the distance covered suggests. Replace them as soon as they streak, judder or miss part of the sweep after cleaning.
How we check fitment for this guide
We cross-reference fitment figures against manufacturer specifications and OE-supplier catalogue data where available, and matched to the standard codes that actually govern fit — battery type/group sizes, wiper lengths and fitting types, bulb fitment codes, tyre size markings, and oil specifications. We work by make, model, year, engine, and build date, because a single model can take different parts across its life. Where the right part depends on your exact vehicle, we tell you to confirm by registration or VIN. More on our method →