MG HS Engine Oil — Grade, Capacity & Recommendations (2020-2024)

MG HS Engine Oil — Grade, Capacity & Recommendations (2020-2024)

MG HS (2020-2024). MG (SAIC) uses ACEA classes rather than a proprietary code. The 1.5 Turbo takes 0W-20 (ACEA C5). ACEA C5 is less common than C3, so check the bottle carefully.

Oil Specification by Engine

Engine Oil grade Specification Capacity (inc. filter)
1.5 Turbo (petrol, incl. PHEV) 0W-20 ACEA C5 ~4 L

MG specifies ACEA C5, which is less widely stocked — many 0W-20 oils carry only API SP without the C5 rating, so read the label. The fully electric MG models use no engine oil. Confirm capacity by VIN.

Not sure which engine you have? The required grade is on the oil filler cap; the engine code is in section D.2 of your V5C.

Critical: Use an oil that specifically lists ACEA C5 in the correct grade for your engine. A 0W-20 or 5W-30 that is only API-rated (no ACEA C5) is not the MG specification and could affect your 7-year warranty.

Recommended Engine Oils

As an Amazon Associate we earn from qualifying purchases. Choose an oil that carries the correct specification for your engine — the approval matters more than the brand. Confirm fitment for your model and year before buying.

1.5 Turbo — 0W-20, ACEA C5

Any 0W-20 meeting ACEA C5

Any 0W-20 meeting ACEA C5

MG’s 1.5 Turbo needs a 0W-20 carrying ACEA C5 — check the label, as many 0W-20 oils are API SP only.

Check price on Amazon

Which Oil Does Your MG HS Need?

MG’s SAIC-built engines follow ACEA standards. The 1.5 Turbo petrol is designed around a thin 0W-20 (ACEA C5) for economy; the 1.0 T-GDi uses a 5W-30 (ACEA C5). The key catch is the C5 rating — it is less common than C3, and a generic API-only oil of the same viscosity is not the MG spec. The fully electric MG models, of course, use no engine oil.

Oil Change Intervals

MG’s interval is typically 12 months or ~10,000–12,000 miles. MG’s 7-year/80,000-mile warranty can be refused if the wrong oil or a missed service is recorded — keep receipts showing an ACEA C5 oil was used.

Tip: always fit a new filter with the oil and confirm the C5 rating on the bottle.

How to Check Your Oil Level

Step 1: Park on level ground and wait at least 5 minutes after turning off the engine.

Step 2: Remove the dipstick, wipe it clean, reinsert fully, then remove again to read the level.

Step 3: The oil level should be between the minimum and maximum marks. Top up in small amounts if needed.

Frequently Asked Questions

What engine oil does the MG HS take?

The 1.5 Turbo uses 0W-20 (ACEA C5); the 1.0 T-GDi uses 5W-30 (ACEA C5). Look specifically for the ACEA C5 rating on the bottle.

Why does MG specify ACEA C5?

C5 is a low-SAPS, low-viscosity class that balances fuel economy with turbo and emissions protection. Many common 0W-20/5W-30 oils are API SP only — check for the C5 rating.

Does the electric MG need oil?

No — the fully electric MG models (such as the MG4 and ZS EV) have no combustion engine and use no engine oil. Only the petrol and plug-in hybrid models need it.

How much oil does it take?

About 4 litres including a filter change; confirm in your handbook.

Other Mg Hs Guides

How we check fitment for this guide

We cross-reference fitment figures against manufacturer specifications and OE-supplier catalogue data where available, and matched to the standard codes that actually govern fit — battery type/group sizes, wiper lengths and fitting types, bulb fitment codes, tyre size markings, and oil specifications. We work by make, model, year, engine, and build date, because a single model can take different parts across its life. Where the right part depends on your exact vehicle, we tell you to confirm by registration or VIN. More on our method →

Leave a Comment

Your email address will not be published. Required fields are marked *

Not sure which parts fit your car? Find out instantly.

Compatibility Checker →
Scroll to Top