Ford Kuga Engine Oil — Grade, Capacity & Recommendations (2020-2024)

Ford Kuga Engine Oil — Grade, Capacity & Recommendations (2020-2024)

Ford Kuga (Mk3, 2020–2024). The Kuga comes as petrol, diesel and hybrid — and all three take different oil. The 1.5 EcoBoost petrol uses 5W-20 (Ford WSS-M2C948-B), the 2.0 EcoBlue diesel uses 0W-30 (WSS-M2C950-A), and the 2.5 Duratec full/plug-in hybrid uses 0W-20 (WSS-M2C947-B1). Find your engine below before you buy.

Oil Specification by Engine

Engine Oil grade Ford specification Capacity (inc. filter)
1.5 EcoBoost (petrol) 5W-20 WSS-M2C948-B 5.5 L
2.0 EcoBlue (diesel / mHEV) 0W-30 WSS-M2C950-A check handbook
2.5 Duratec (FHEV / PHEV hybrid) 0W-20 WSS-M2C947-B1 check handbook

The petrol and diesel engines take a full-synthetic, low-SAPS oil; the 2.5 hybrid uses Ford’s dedicated 0W-20 hybrid oil. Diesel and hybrid capacities vary by variant and build date — confirm yours against the owner’s manual or by registration/VIN before buying volume.

Not sure which engine you have? Check section D.2 of your V5C logbook for the engine code, or look at the badge on the tailgate.

Critical: Match the Ford specification for your engine, not just the viscosity. Petrol = WSS-M2C948-B, diesel = WSS-M2C950-A, hybrid = WSS-M2C947-B1. Using the wrong oil can damage the timing belt, clog the DPF, or harm the hybrid system, and may void your warranty.

Recommended Engine Oils

As an Amazon Associate we earn from qualifying purchases. The approval matters more than the brand — choose any oil carrying the correct Ford WSS spec for your engine, and confirm fitment for your model and year before buying.

Petrol 1.5 EcoBoost — 5W-20, WSS-M2C948-B

Comma Eco-F 5W-20

Comma Eco-F 5W-20

Carries Ford WSS-M2C948-B; made for EcoBoost wet-belt petrol engines.

Check price on Amazon

Mobil Super 3000 Formula F 5W-20

Mobil Super 3000 Formula F 5W-20

Full-synthetic 5W-20 meeting Ford WSS-M2C948-B.

Check price on Amazon

Diesel 2.0 EcoBlue — 0W-30, WSS-M2C950-A

Castrol Magnatec 0W-30 D

Castrol Magnatec 0W-30 D

Meets Ford WSS-M2C950-A; low-SAPS, protects the DPF on EcoBlue diesels.

Check price on Amazon

Fuchs Titan GT1 0W-30

Fuchs Titan GT1 0W-30

Full-synthetic 0W-30 approved to Ford WSS-M2C950-A.

Check price on Amazon

Hybrid 2.5 Duratec — 0W-20, WSS-M2C947-B1

Castrol Magnatec Hybrid 0W-20

Castrol Magnatec Hybrid 0W-20

0W-20 carrying Ford WSS-M2C947-B1, formulated for hybrid stop-start running.

Check price on Amazon

Ford-approved 0W-20 (WSS-M2C947-B1)

Ford-approved 0W-20 (WSS-M2C947-B1)

Any 0W-20 meeting Ford WSS-M2C947-B1 suits the 2.5 Duratec FHEV/PHEV.

Check price on Amazon

Petrol, Diesel or Hybrid: Which Oil Does Your Kuga Need?

The Kuga range splits three ways. The 1.5 EcoBoost petrol uses a low-friction 5W-20 to Ford WSS-M2C948-B — the same low-SAPS chemistry that protects the oil-immersed timing belt. The 2.0 EcoBlue diesel (including the mild-hybrid version) uses 0W-30 to WSS-M2C950-A, a very low-SAPS oil that keeps the DPF clear.

The 2.5 Duratec hybrid (both full hybrid and plug-in hybrid) is different again: a 0W-20 oil to Ford WSS-M2C947-B1, matched to the Atkinson-cycle engine and frequent stop-start running. Don’t substitute a petrol or diesel oil here.

In the grade, the first number (0W/5W) is cold-start flow and the second (20/30) is hot viscosity — but always match the full grade and the WSS specification for your engine.

Oil Change Intervals

Ford services the Kuga on a time-or-mileage schedule — typically every 12 months or when the dashboard service indicator calls for it, with the mileage interval depending on engine and use. Diesel EcoBlue models and any car used mainly for short urban trips should be changed toward the shorter end to protect the DPF and oil quality.

Tip: always fit a new oil filter with the oil — an old filter restricts flow and contaminates fresh oil straight away.

How to Check Your Oil Level

Step 1: Park on level ground and wait at least 5 minutes after turning off the engine.

Step 2: Remove the dipstick, wipe it clean, reinsert fully, then remove again to read the level.

Step 3: The oil level should be between the minimum and maximum marks. Top up in small amounts if needed.

Frequently Asked Questions

Does the Ford Kuga petrol, diesel and hybrid use the same oil?

No — all three differ. The 1.5 EcoBoost petrol takes 5W-20 (WSS-M2C948-B), the 2.0 EcoBlue diesel takes 0W-30 (WSS-M2C950-A), and the 2.5 Duratec hybrid takes 0W-20 (WSS-M2C947-B1). Always match your own engine.

What oil does the Ford Kuga 1.5 EcoBoost use?

A low-friction 5W-20 meeting Ford WSS-M2C948-B, roughly 5.5 litres including a filter change. Confirm the exact figure against your handbook.

What oil does the Kuga 2.5 hybrid (FHEV/PHEV) take?

A 0W-20 oil meeting Ford WSS-M2C947-B1, the dedicated approval for the 2.5 Duratec hybrid engine. Do not use a standard petrol or diesel oil.

Can I use 5W-30 in my Kuga diesel?

Only if it meets Ford WSS-M2C950-A. The specified grade for the 2.0 EcoBlue is 0W-30; a non-approved oil can affect the DPF and emissions system.

Other Ford Kuga Guides

How we check fitment for this guide

We cross-reference fitment figures against manufacturer specifications and OE-supplier catalogue data where available, and matched to the standard codes that actually govern fit — battery type/group sizes, wiper lengths and fitting types, bulb fitment codes, tyre size markings, and oil specifications. We work by make, model, year, engine, and build date, because a single model can take different parts across its life. Where the right part depends on your exact vehicle, we tell you to confirm by registration or VIN. More on our method →

Leave a Comment

Your email address will not be published. Required fields are marked *

Not sure which parts fit your car? Find out instantly.

Compatibility Checker →
Scroll to Top