Nissan Qashqai Engine Oil â Grade, Capacity & Recommendations (2021-2024)
Oil Specification by Engine
| Engine | Oil grade | Specification | Capacity (inc. filter) |
|---|---|---|---|
| 1.3 DiG-T (petrol, mild hybrid) | 5W-30 | ACEA C3 | check handbook |
| 1.5 e-Power (hybrid) | 0W-20 | API SP / ILSAC GF-6 | check handbook |
Unlike Ford, VW or PSA, Nissan does not use a proprietary oil “number” — match the viscosity grade and the ACEA/API class instead. The J12 Qashqai is not offered with a diesel engine. Capacities vary by build — confirm against your owner’s manual or by registration/VIN.
Not sure which you have? The e-Power badge is on the tailgate, and the engine code (HR13DDT vs KR15DDT) is in section D.2 of your V5C.
Recommended Engine Oils
1.3 DiG-T mild hybrid — 5W-30, ACEA C3
Castrol EDGE 5W-30 C3
Full-synthetic 5W-30 meeting ACEA C3, suited to the 1.3 DiG-T turbo petrol.
1.5 e-Power hybrid — 0W-20, API SP
Castrol EDGE 0W-20
Full-synthetic 0W-20 meeting API SP / ILSAC GF-6 for the e-Power 1.5 VC-Turbo.
Mobil 1 0W-20
0W-20 API SP, formulated for modern low-viscosity hybrid petrol engines.
1.3 DiG-T or 1.5 e-Power: Which Oil Does Your Qashqai Need?
The J12 Qashqai uses two very different petrol powertrains. The 1.3 DiG-T is a Renault-Nissan turbo petrol with mild-hybrid assistance; it takes a conventional low-SAPS 5W-30 (ACEA C3). The 1.5 e-Power is a full hybrid where the 1.5 VC-Turbo petrol engine acts as a generator; it is designed for a thinner, more fuel-efficient 0W-20 (API SP / ILSAC GF-6).
Because Nissan specifies oil by viscosity and ACEA/API class rather than a proprietary code, the key is simply to use the right grade for your engine. Don’t assume both versions share oil — they don’t.
Oil Change Intervals
Nissan’s service interval for the Qashqai is typically 12 months or around 12,500–18,000 miles, shown by the maintenance reminder. Hybrid and turbocharged engines used mainly for short urban journeys benefit from changing toward the shorter end to keep the oil in good condition.
Tip: always fit a new oil filter with the oil, and use the exact grade for your engine.
How to Check Your Oil Level
Step 1: Park on level ground and wait at least 5 minutes after turning off the engine.
Step 2: Remove the dipstick, wipe it clean, reinsert fully, then remove again to read the level.
Step 3: The oil level should be between the minimum and maximum marks. Top up in small amounts if needed.
Frequently Asked Questions
What engine oil does a 2021-2024 Nissan Qashqai take?
It depends on the engine: the 1.3 DiG-T mild hybrid uses 5W-30 (ACEA C3), and the 1.5 e-Power hybrid uses 0W-20 (API SP). The J12 Qashqai is not sold as a diesel.
Does the Qashqai e-Power use the same oil as the 1.3 petrol?
No. The 1.5 e-Power is designed for a thinner 0W-20, while the 1.3 DiG-T uses 5W-30. Match the grade to your specific engine.
Does the new Qashqai come in diesel?
No. The third-generation (J12) Qashqai is petrol-only — the 1.3 DiG-T mild hybrid and the 1.5 e-Power full hybrid. Diesel was only offered on the previous J11 generation.
How much oil does a Nissan Qashqai take?
It varies by engine and build; confirm the exact figure in your owner’s manual. Nissan specifies oil by viscosity grade and ACEA/API class rather than a proprietary number.
Other Nissan Qashqai Guides
Bulb GuideHeadlight & indicator bulbs
Cabin Filter GuideFilter type & replacement
Battery GuideSize, type & specs
Spark Plug GuideType & gap settings
How we check fitment for this guide
We cross-reference fitment figures against manufacturer specifications and OE-supplier catalogue data where available, and matched to the standard codes that actually govern fit — battery type/group sizes, wiper lengths and fitting types, bulb fitment codes, tyre size markings, and oil specifications. We work by make, model, year, engine, and build date, because a single model can take different parts across its life. Where the right part depends on your exact vehicle, we tell you to confirm by registration or VIN. More on our method →