Wiper Blade Sizes at a Glance
24″
Driver Side
16″
Passenger Side
12
Rear
Full Wiper Blade Specifications
| Position | Size (Inches) | Size (mm) | Fitting Type |
|---|---|---|---|
| Driver (right-hand drive) | 24″ | 600mm | Pinch Tab (Push Button) |
| Passenger | 16″ | 400mm | Pinch Tab (Push Button) |
| Rear | 12″ | 300mm | Bayonet |
UK vehicles are right-hand drive — the driver side wiper (24″) is on the right when viewed from outside the car. Always double-check your vehicle handbook before ordering.
Recommended Wiper Blades for Citroën C3
Bosch Aerotwin Set
24″ + 16″ | Pinch Tab (Push Button) fitting | All-season
From ~£18
Valeo Silencio Set
24″ + 16″ | Pinch Tab (Push Button) fitting | Quiet operation
From ~£15
HELLA Premium Set
24″ + 16″ | Pinch Tab (Push Button) fitting | OE quality
From ~£16
How to Fit Wiper Blades on a Citroën C3
Fitting wiper blades with a Pinch Tab (Push Button) fitting is straightforward. Here’s a step-by-step guide:
- Lift the wiper arm away from the windscreen until it locks in the upright position.
- Press the release tab on the pinch tab (push button) connector and slide the old blade off the arm.
- Align the new blade with the arm hook and slide it on until you hear a click.
- Gently lower the arm back onto the windscreen — don’t let it snap down.
- Repeat for the other side, remembering the sizes differ: 24″ driver, 16″ passenger.
Pro tip: Replace both front wipers at the same time, even if only one looks worn. This ensures even performance across the full windscreen sweep.
Frequently Asked Questions
What size wiper blades does a Citroën C3 need?
The Citroën C3 (Mk4) uses 24″ driver side, 16″ passenger side, and 12″ rear wiper blade.
What fitting type do Citroën C3 wipers use?
The front wipers use a Pinch Tab (Push Button) fitting. The rear uses Bayonet fitting.
How often should I change Citroën C3 wiper blades?
Replace wiper blades every 12 months or when you notice streaking, smearing, or squeaking. UK winters are particularly harsh on wiper rubber.
Can I use flat wiper blades on a Citroën C3?
Yes, as long as you match the correct Pinch Tab (Push Button) fitting type and sizes (24″ driver, 16″ passenger), flat (beam) blades will fit your Citroën C3.