Audi Q3 Wiper Blade Size & Fitting Guide (2019-2024)

Affiliate disclosure: this page contains affiliate links, including Amazon links marked “Check Price” / “View on Amazon” / “Search on Amazon”. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you. How this works.

Audi Q3 Wiper Blade Size & Fitting Guide (2019-2024)

Audi Q3 (F3, 2019-2024) — Quick reference wiper blade guide with sizes, fitting type, and top-rated replacements.

Wiper Blade Sizes

Front blade lengths and arm fitting for the Audi Q3, taken from the Bosch and Valeo entries in the TecDoc-derived parts catalogue. Catalogues publish a front set as two lengths and do not state which blade belongs on the driver’s arm of a right-hand-drive car, so this table labels the blades by length rather than by side. Measure the blade you are replacing, or check both arms, before you order.

PositionBlade lengthArm fitting
Front pairDisputed long blade — Bosch 600 mm / 24 in + 500 mm / 20 in; Valeo 630 mm / 25 in + 500 mm. Both agree on the 500 mm blade.Top Lock / push-button
RearNo data available

Recommended Wiper Blades for Audi Q3

As an Amazon Associate we earn from qualifying purchases. Always confirm the exact fitment for your model & year before buying.

Amazon
Find the exact wiper blade for your Audi Q3
Search on Amazon

Confidence in this data: Medium-High front, none rear

Checked against: Autodoc Q3 F3B and Q3 Sportback F3N

What Fitting Type?

Catalogue fitting for the Audi Q3: Front Top Lock

Adapter warning. The Bosch set listed for this car is an Aerotwin Original (A-prefix). Aerotwin Originals ship with a single moulded, vehicle-specific adapter — they are not multi-fit and will not clip onto a different arm type. Bosch’s multi-fit products are the Aerotwin Retrofit (AR-prefix) and Aerotwin Plus (AP-prefix) ranges.

Right-hand drive. At least one supplier publishes a distinct right-hand-drive part number for this vehicle. On a UK car the blades sweep the opposite way to a left-hand-drive car, and the profile and stops differ, so buy the part the catalogue flags for right-hand drive where one exists — the references below say which.

Fit blades in pairs. Both front blades age at the same rate, so replacing only the streaking one usually means doing the other within weeks.

Recommended Wiper Blades

Product

Bosch A297S

A297S (3397007297) 600/500 Top Lock A-series Original flagged left-hand drive; A298S (3397007298) 600/500 A-series Original for right-hand drive — A298S IS the correct part for a UK car. Also listed: 3397014164, 625/500 Top Lock left-hand drive (a third Bosch answer, unresolved).

Search on Amazon

Product

Valeo VF892

574462 600/500 Top Lock left-hand drive; VF892 (577892) 630/500 Top Lock left-hand drive; VF893 (577893) 630/500 Top Lock right-hand drive

Search on Amazon

Product

Check by registration

The rear blade for this vehicle is not established in the data we checked. No data available. Use a seller’s registration lookup rather than buying on length alone.

Search on Amazon

How to Replace Wiper Blades

Changing the front blades on the Audi Q3 takes a few minutes and needs no tools.

  1. Lift the arm away from the glass until it locks upright, and lay a folded cloth on the screen in case it drops.
  2. Release the old blade. Press the release tab on the top of the connector and pull the blade square off the arm — it unclips rather than sliding.
  3. Compare old and new side by side before fitting — same length, same connector. If the adapter does not match, stop; forcing it damages the arm.
  4. Fit the new blade until the catch clicks home, then tug it gently to confirm it is locked.
  5. Lower the arm back to the glass by hand. Repeat on the other side, then test with plenty of washer fluid on a wet screen.

Never let a bare arm snap back onto the glass — a windscreen chipped that way is not covered by the blade warranty.

When to Replace Your Wipers

Wiper rubber hardens with UV and heat rather than with mileage, so a set on a car that is parked outside will usually be finished in about 12 months whatever the distance covered. Replace them when you see any of the following:

  • Streaks or a haze left behind on the return sweep
  • Juddering or chattering across the glass
  • Missed strips of screen, especially at the top of the sweep
  • Splits, curling or a shiny, glazed edge on the rubber
  • Squealing that does not clear with a wash and a wipe of the rubber

Clean the rubber with a damp cloth every few weeks and clear leaves and grit from the base of the screen; both add months to a set. A blade that still streaks after cleaning is worn, not dirty.

Frequently Asked Questions

What size wiper blades does an Audi Q3 need?

Sources disagree for the Audi Q3. Disputed long blade — Bosch 600 mm / 24 in + 500 mm / 20 in; Valeo 630 mm / 25 in + 500 mm. Both agree on the 500 mm blade. Because the figures conflict, measure the blades on your own car before ordering.

What fitting type do Audi Q3 wipers use?

The Audi Q3 is catalogued as: Front Top Lock Note that Bosch Aerotwin Original (A-prefix) sets carry one moulded, vehicle-specific adapter and are not multi-fit.

What rear wiper blade does an Audi Q3 take?

No data available for the rear blade on the Audi Q3. Where suppliers disagree or list nothing, we say so rather than guess — check by registration.

How often should I replace Audi Q3 wiper blades?

About once a year for most UK cars. Wiper rubber degrades with UV, heat and grit rather than with mileage, so a car parked outside will need blades sooner than the distance covered suggests. Replace them as soon as they streak, judder or miss part of the sweep after cleaning.

Does the Audi Q3 need a right-hand-drive specific set?

Yes — at least one supplier publishes a distinct right-hand-drive part for this vehicle, listed in the references on this page. A UK car sweeps the opposite way to a left-hand-drive car and the blade profile and park position differ, so use the right-hand-drive part where the catalogue offers one.

Other Audi Q3 Guides

How we check fitment for this guide

We cross-reference fitment figures against manufacturer specifications and OE-supplier catalogue data where available, and matched to the standard codes that actually govern fit — battery type/group sizes, wiper lengths and fitting types, bulb fitment codes, tyre size markings, and oil specifications. We work by make, model, year, engine, and build date, because a single model can take different parts across its life. Where the right part depends on your exact vehicle, we tell you to confirm by registration or VIN. More on our method →

Not sure which parts fit your car? Find out instantly.

Compatibility Checker →
Scroll to Top