Peugeot 2008 Engine Oil — Grade, Capacity & Recommendations (2020-2024)
Oil Specification by Engine
| Engine | Oil grade | Specification | Capacity (inc. filter) |
|---|---|---|---|
| 1.2 PureTech (petrol) | 0W-30 | PSA B71 2312 | check handbook |
Not sure which engine you have? PSA PureTech/BlueHDi engine codes start with EB or DV/DW; the required spec is on the oil filler cap and the code is in section D.2 of your V5C.
Both engine families use the same 0W-30, PSA B71 2312 low-SAPS oil. Capacities vary by variant — confirm against your owner’s manual or by VIN before buying volume.
Recommended Engine Oils
PureTech petrol — 0W-30, PSA B71 2312
Total Quartz Ineo First 0W-30
The genuine Stellantis/PSA OE oil; carries PSA B71 2312 for PureTech and BlueHDi engines.
Motul Specific 2312 0W-30
Full-synthetic 0W-30 approved to PSA B71 2312, made for PureTech wet-belt engines.
Any 0W-30 meeting PSA B71 2312
Any oil that explicitly lists the PSA B71 2312 approval is suitable.
Why Your 2008 Needs PSA 0W-30 (B71 2312)
The 2008 is built on Stellantis underpinnings. Its 1.2 PureTech petrol engines are designed around 0W-30 oil to the PSA B71 2312 standard — a low-SAPS formulation that protects the PureTech’s wet timing belt.
Many parts shops still suggest a generic 5W-30; in a PureTech that is the wrong oil and can lead to expensive belt failure. Always match 0W-30 + PSA B71 2312.
Oil Change Intervals
Stellantis nominal intervals are around 12 months or up to ~16,000 miles via the service indicator. Because the 1.2 PureTech wet belt is sensitive to oil condition, many specialists advise changing more often — every 6,000–9,000 miles or annually — especially for short-trip driving.
Tip: always fit a new filter with the oil, and never let a PureTech run low on oil.
How to Check Your Oil Level
Step 1: Park on level ground and wait at least 5 minutes after turning off the engine.
Step 2: Remove the dipstick, wipe it clean, reinsert fully, then remove again to read the level.
Step 3: The oil level should be between the minimum and maximum marks. Top up in small amounts if needed.
Frequently Asked Questions
What engine oil does the Peugeot 2008 take?
A 0W-30 oil meeting PSA B71 2312 — the same for the PureTech petrol engines. Do not use a generic 5W-30.
Can I use 5W-30 in my 2008 1.2 PureTech?
No. The PureTech engine is designed for 0W-30 to PSA B71 2312. A thicker or non-approved oil can damage the wet timing belt — a known PureTech failure point.
Is the 2008 oil the same as a Peugeot/Citroen with the same engine?
Yes — all Stellantis cars with the 1.2 PureTech share the same 0W-30 PSA B71 2312 specification.
How much oil does it take?
Roughly 3.3–4 litres for the 1.2 PureTech including a filter change; confirm the exact figure in your handbook.
Other Peugeot 2008 Guides
Bulb GuideHeadlight & indicator bulbs
Cabin Filter GuideFilter type & replacement
Battery GuideSize, type & specs
Spark Plug GuideType & gap settings
How we check fitment for this guide
We cross-reference fitment figures against manufacturer specifications and OE-supplier catalogue data where available, and matched to the standard codes that actually govern fit — battery type/group sizes, wiper lengths and fitting types, bulb fitment codes, tyre size markings, and oil specifications. We work by make, model, year, engine, and build date, because a single model can take different parts across its life. Where the right part depends on your exact vehicle, we tell you to confirm by registration or VIN. More on our method →